Biotrickling filter modeling for styrene abatement. Part 1: Model development, calibration and validation on an industrial scale

Chemosphere
Pau San-ValeroC Gabaldón

Abstract

A three-phase dynamic mathematical model based on mass balances describing the main processes in biotrickling filtration: convection, mass transfer, diffusion, and biodegradation was calibrated and validated for the simulation of an industrial styrene-degrading biotrickling filter. The model considered the key features of the industrial operation of biotrickling filters: variable conditions of loading and intermittent irrigation. These features were included in the model switching from the mathematical description of periods with and without irrigation. Model equations were based on the mass balances describing the main processes in biotrickling filtration: convection, mass transfer, diffusion, and biodegradation. The model was calibrated with steady-state data from a laboratory biotrickling filter treating inlet loads at 13-74 g C m-3 h-1 and at empty bed residence time of 30-15 s. The model predicted the dynamic emission in the outlet of the biotrickling filter, simulating the small peaks of concentration occurring during irrigation. The validation of the model was performed using data from a pilot on-site biotrickling filter treating styrene installed in a fiber-reinforced facility. The model predicted the performance of the...Continue Reading

Related Concepts

Related Feeds

Bioremediation (ASM)

Bioremediation is the treatment and removal of harmful pollutants or contaminants through the use of microorganisms. Discover the latest research here.

Related Papers

International Journal of Environmental Research and Public Health
Pau San-ValeroC Gabaldón
Water Science and Technology : a Journal of the International Association on Water Pollution Research
Feliu SempereC Gabaldón
© 2022 Meta ULC. All rights reserved