Reusability and regeneration of solid catalysts used in ultrasound assisted biodiesel production.

Turkish Journal of Chemistry
Mahmut BayramoğluBaşak Temur Ergan

Abstract

Reusability of two heterogeneous catalysts in ultrasound (US) assisted biodiesel production was investigated in comparison to each other. An ultrasound (US) generator (200 W, 20 kHz) equipped with a horn type probe (19 mm) was used. Regeneration experiments were planned according to second order central composite design (CCD) method. After the eighth use of the catalysts, biodiesel yield decreased from 99.1% to 90.4% for calcined calcite (CaO) and from 98.8% to 89.8% for calcined dolomite (CaO.MgO). Furthermore, regeneration of spent catalysts by calcination was investigated; optimum temperature and time were found as 750 °C and 90 min, lower than fresh catalyst preparation conditions. The regenerated catalysts were reused in a second process cycle; biodiesel yield was calculated as 97.2% for CaO and 96.5% for CaO.MgO. Finally, the process showed that calcination is an energetically favorable regeneration process of spent catalysts.

Software Mentioned

- Expert
Design

Related Concepts

Related Feeds

Biofuels (ASM)

Biofuels are produced through contemporary processes from biomass rather than geological processes involved in fossil fuel formation. Examples include biodiesel, green diesel, biogas, etc. Discover the latest research on biofuels in this feed.